JS Series Forced Concrete Mixer 750 Liter with Twin Shaft Blades
JS750 concrete mixer Mixer equipment introduction
JS750 concrete mixer is a kind of twin horizontal shaft forced
mixer.
This mixer has double superiority to do independent operation
alone, or form a simple concrete batching plant together with PLD
series aggregate batching machine. Also can be used as concrete
batching plant's main host.
It's a kind of widely used heigh efficiency mixing machine.
Performance advantages:Reasonable structure design, novelted
layout,easily for maintainence.
Can be used together with tipper car,dumper truck or mixer truck.
And also can be tailored as per special requirement to meet with
client's demands.
Mixing system
JS750 concrete mixer mixing system consists of motor, pulley,
gearbox, gear, stirring device, mixing drum and other components.
The main motor is connected to the secondary gear reduction box
through a belt, and finally the two horizontally-connected stirring
shafts are respectively rotated by the two pairs of open gears at
the same speed.
Feeding system
When the JS750 concrete mixer is feeded, the mixture to be mixed is
placed in the hopper, the feeding system is started, and the wire
rope pulling hopper is climbed upward. When climbing to a certain
height, the hopper enters the feeding rack, the door is
automatically opened, and the material is discharged into the
mixing drum through the funnel.
Discharging system
The discharging system is located at the bottom of the JS750
concrete mixer and is unloaded by a manual push rod. According to
customer requirements, the mixer can be produced in the form of
electric push rod discharge. The connection between the discharge
door and the mixing drum is sealed with a sealing plate, and the
position of the sealing plate can be adjusted to ensure the purpose
of sealing.
Electrical System
The electrical control system needs to control the main drive motor
of the JS750 concrete mixer, the motor of the water supply system,
the feeding and unloading of the motor. All electrical control
components are located in the distribution box. The electrical
components in the distribution box are installed on an iron plate,
which is safe and reliable, and convenient for operation and
maintenance.
Technical Parameters
| project | JS750 |
| Discharge capacity | 750L |
| Feed capacity | 1200L |
| Theoretical productivity | ≤35m³/h |
| Maximum granule of aggregate (Lithotripsy/Pebble) | ≤40/60 |
| Speed of mixing blade | 31(R/min) |
| 2*7(number) |
| Power of agitator | 30KW |
| Improve motor power | 7.5KW |
| Pump motor power | 1.1KW |
| Shape size (Length, width and height) | 5025*3100 *5680 |
